1)Always unplug the tool when you change accessory.
2)Do not use near or place in water. If motor falls into water, unplug
3)Do not reach into water.
4)Do not touch the bit after use.
5)The bit is too hot to be touched by bare hands Keep dust out of eyes and lungs by using protective eyewear or a dust mask Always unplug it after use.
6)When the machine is not is use, all tool must be stored in a dry location abd keep out of children.
AC Input: 100-240V
DC Output: 9V/1000mA
Stepless Speed: 3,000-20,000 RPM
1.Small Comfortable Handgrip
Just hold it like holding a pen, lightweight compact design,
letting you perform intricate work smoothly and effortlessly
2.Easy to Control the Tool
Easily control the engraving/drawing path.
Makes smooth and clear strokes.
Works for metal, glass, ceramic, plastic, wood, etc.
1 x Electric nail drill machine
1 x Power Cable (USB)
6 x Bits (5 diamond bits, 1 emery rod with 6 sanding bands)
6 x Sanding Rings
12 x Soft Polishing Felt Cone
30 x Bits(Includeing 10 pointed bits,5 round bits,4 jujube-shaped bits,11 flat bits)
HOW TO USE
Step 1: Press shaft lock button, unscrew the collet nut anticlockwise (take out the collet nut).
Step 2: Use one bit to insert the hole and make the bit into the hole. Take it out and re-insert it again for several times because the hole is tight when it is made out from factory.
Step 3:Press shaft lock button and tighten the collet clockwise securely. Avoid excess tightening of the collet nut in case of damage in the nut.
Step 4: connect the cord. Turn on it and Manicure the nails to the state you want.