Type 1: G90B Plus WiFi 3G GSM GPRS Wireless Home alarm system IOS Android APP Control(PIR*3+D/W Sensor*4+Key*2)
Type 2: G90B Plus WiFi 3G GSM GPRS Wireless Home alarm system IOS Android APP Control(PIR*3+D/W Sensor*6+Key*4)
Type 3: G90B Plus WiFi 3G GSM GPRS Wireless Home alarm system IOS Android APP Control(PIR*4+D/W Sensor*8+Key*4)
Type 4: G90B Plus WiFi 3G GSM GPRS Wireless Home alarm system IOS Android APP Control(PIR*4+D/W Sensor*10+Key*4)
Type 5: G90B Plus WiFi 3G GSM GPRS Wireless Home alarm system IOS Android APP Control(PIR*5+D/W Sensor*12+Key*4)
Type 6: G90B Plus WiFi 3G GSM GPRS Wireless Home alarm system IOS Android APP Control(PIR*6+D/W Sensor*16+Key*4)
Question & Answer:
1.Q: Can this alarm system work with WIFI and GSM Sim Card together So if the WIFI failure, can switch GSM/GPRS mode to work.
A:Yes. User can connect alarm system with WIFI and GSM Sim Card to work. And this is upgrade model. it is G90B Plus, it can be compatible with 3G Or 4G phone card,And when Alarm System be triggered, it will push alarm message to the APP via WIFI. And if the WIFI failure, will change GSM/GPRS mode auto Dial Out.
2. Q: It just with WIFI in my house and without GSM Sim Card,can I use this alarm system
A: Yes. Alarm System can work in WIFI mode only.
3. Q: Can I add additional remote controllers, door sensors, pir sensors, smoke detectors, gas detectors or other sensors to work with this alarm system
A: Yes. Alarm system can work up to 99 wireless sensors and wireless Siren, unlimited Wifi Camera.
4. Q: Does the alarm panel with backup battery
A: Yes. Alarm system with internal rechargeable backup battery. It can support work when AC Adapt is cut.
5. Q: what's the difference between G90B and G90B plus
A: G90B is only compatible with 2G card, but G90B plus can be compatible with 3G Or 4G phone card
G90B Plus can be connected with 8 wired defense zones, But G90B only can be connected wired defense zones.
the wifi signal is more stable of G90B plus, so the price alsi is higher than G90B.
Main Function And Feature:
1.WIFI + GSM + GPRS word menu home alarm system
2.Android + IOS APP application easily control, Easy to give authorization. The first one Scanning QR code in the APP page will become the administrator
3.Notification push when there is no WIFI, the host will push via GPRS
4.Work with IP camera,The IP camera APP embeds in the host APP.you can
5.view the IP camera by phone.
6.Workable with RFID wireless keypad ,support doorbell function
7.Zone names can be revised by users
8.Relay usages name can be revised by users
9.Independent zones. Every zone can be set be independent zone,
10.which can only disarm by administrator's APP, The feature is fit for finance office.
11.Leaving message remotely in APP or host.
1) When leaving message in APP, such as: I will go home late, don't wait for me.Next the message is automatically mapping to the host. Users will see the light to reminder.
2) When long press the "record" button for 3 sec in the host panel, will start a new memo, and automatically mapping to the APP end. Slightly press"record" will play the new message.
12.Information push promptly when AC power lost or recovered or detectors in low voltage
13.Build-in wireless transmitter, can control 4 wireless relay outputs and wireless sound&strobe siren.
14.96 wireless zones+4 wired defense zones+4 wired relay, Can store 6 alarm call phone No.
15.wireless encoding between host and detectors, innumerable detectors for each wireless zone
16.Arm/alarm Delay for each defense zone. Timed arm/disarm function
17.10-second voice message recording
18.Support Monitoring and two-way intercom function.
19.The host can be used as a hand-free phone.
Wireless relay output
Live line : AC 220V/50Hz-60Hz
Neutral line : AC 110V -250V AC/ 50Hz-60Hz
Wireless frequency: 433mhz
Electric current : 10A relay
Power Requirements : DC12V
Current: standby<20MA, Transfer signals<30MA
Signal transferring parameters:
Chip: EV1527; Frenquency:433Mhz; Vibration resistance: 330K
Battery lifetime: More than 30 days, 1.5V AAA *5PCS (One-time battery)
Transfer Signals Distance: Outdoors>100m, Indoors<50m
Wireless PIR detector
Artistic outward appearance, universal bracket included
9V battery,microcomputer control, unique detecting memory,long life
Unique temperature compensated circuit, automatic low voltage alert
Detecting parameter:110 10Mx10M
Emitting distance: 15-50M (in open area)
Outdoor wireless siren
Power Requirements :12VDC
with backup battery and adapter
Used for outdoor,waterproof.
Current Consumption:20mA (High-low sound)
Transmit Way:through line
Humidity:less than 90%
Intensity of buzzer'volume:110 decibel at 12VDC
Operational Temp:-10 C~+40 C
Wireless smoke detector
Using infrared photoelectric sensor.
A device that detects smoke and issues
an alarm to alert nearby people that there is a potential fire.
It has built-in buzzer and will send signal to make the system alarms
Battery: DC9V, 6F22
We notice many users require system remind them close the doors or windows when they go away the house.And now our company design a new door sensor (D07) for this alarm system which one can remind users close the door/window when they outside.When user arm the system and the doors/windows install this door sensor are opening,the alarm screen will show "xx zone error" and users' phone will get the message.