iMeshbean 1 HP Submersible Pump 4" Deep Well Pump 35 GPM 207 ft MAX Long Wires
1 HP, 4", 115V, 35 GPM, 207ft MAX Head Submersible Pump
Specification:
Motor: 1HP / 0.75KW
Voltage: 110V / 60Hz
Work Current: 10.3 AMP
Outlet Diameter:1-1/4" NPT Discharge
Diameter: 4"
Max flow: 7.5 m³/h, 35GPM
Max Head: 207 FT
Number of Impellers: 6
Protection Grade: IP58
Pump Body Material: Stainless Steel - High strength and corrosion resistance
Water Temperature: (32 ~113 ℉ )
Water Ph: 6.5~ 8.5
Maximum Sand Content: 0.25%
1 HP, 4", 115V, 35 GPM, 207ft MAX Head Submersible Pump
Specification:
Motor: 1HP / 0.75KW
Voltage: 110V / 60Hz
Work Current: 10.3 AMP
Outlet Diameter:1-1/4" NPT Discharge
Diameter: 4"
Max flow: 7.5 m³/h, 35GPM
Max Head: 207 FT
Number of Impellers: 6
Protection Grade: IP58
Pump Body Material: Stainless Steel - High strength and corrosion resistance
Water Temperature: (32 ~113 ℉ )
Water Ph: 6.5~ 8.5
Maximum Sand Content: 0.25%
1hp Deep Well Pump Package Including
- 1 x submersible well pump
- 1 x 33' long electric cord
- 1 x110v US plug
- Installation manual
NOTICE:
- This pump has a built-in check valve. However, installing an additional check valve is recommended
- Built-in Check Valve: Only used to avoid damage due to backflow of water and causing backspin of the impellers.
- Built-in Control Box: Only for thermal protection, short-circuit protection, and overload protection, DO NOT have a power on-off function.
-
The US plug
and power cord are separated, then you can extend or shorten the power
cord based on your needs This pump has a built-in check valve. However,
installing an additional check valve is recommended
High-quality Material
- The submersible well pump comprises 304 stainless steel and a built-in check valve, rust-proof and corrosion-proof. You can get our durable and sturdy pump.
Stainless Steel Strainer & 33FT cord
-
Fixed with a filter screen to prevent solid grain of a given size from entrance of the pump,2 wire pump with 3-Wire (2 wires + ground wire)
Submersible Pump Application
- Water supply from wells or reservoirs Household use, for civil and industrial applications Garden and courtyard irrigation Swimming pool filling Fountains
For using a pressure tank - Max water level VS. pressure switch settings:
Pressure switch set @ 20/40 psi
114 feet (max static water level)
Pressure switch set @ 30/50 psi
91 feet (max static water level)
Pressure switch set @ 40/60 psi
68 feet (max static water level)
For using a pressure tank - Max water level VS. pressure switch settings:
Pressure switch set @ 20/40 psi |
114 feet (max static water level) |
Pressure switch set @ 30/50 psi | 91 feet (max static water level) |
Pressure switch set @ 40/60 psi | 68 feet (max static water level) |
Customers Also Viewed
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.